14
5. REAR PANEL CONNECTIONS
RCA Inputs
RCA cinch input
Input for preamplifier (using RCA cinch interconnect)
Ecomode Switch
Eco off: Ecomode automatic is off.
Eco on: Ecomode automatic is on.
During Ecomode ON the Ecomode LED lights up
in green. After 10 minutes without signal the
Ecomode turns the unit down and the color of the
Ecomode LED turns to red.
Input and Muting switch
Toggles between the inputs RCA and XLR and the function
“Muting”
Switch up: RCA input is active
Switch central: XLR input is active
Switch down: both inputs are muted.
This position is useful for connecting and disconnecting
cables without switching off the amplifier.
XLR-Input
Pin 1: Ground, Pin 2: +, Pin 3 –
Loudspeaker Terminal
Right Channel
Binding posts to connect the speaker cable.
Red = positive terminal, Black = negative terminal.
You can connect either 4 mm Banana connectors or spades.
The negative speaker terminal is connected to ground.
To Next Page
Loading...
Need help?
General
