108 > B401/B411/B431
You can have more than one printer (.PRN) file in a project.
For example, one for top pages and another for
continuation pages. Use standard Windows techniques
(Shift or Ctrl keys) to select multiple files simultaneously if
you need to.
6. Click Open to add these files to the current project.
7. When a message box appears confirming that a filter file
has been created, click OK to clear the message.
8. The project window will display one.HST file for each
printer file added. Make a careful note of each of these
names. Ensure that you note them exactly as they appear,
they are case sensitive, and you will need them later.
9. Choose Projects > Save Project and enter a meaningful
name (e.g. “Letter Stationery”) so that you can recognize
it later if you want to modify it.
10. Choose Projects > Send Project Files to Printer to
download the project to the printer.
If you have a hard disk in the printer, SDM will
automatically download files to it. If not, SDM will download
files to flash memory. If you have a hard disk but still prefer
to download to flash memory, double-click the file name in
the Project window and under Volume, type in
%Flash0% and then click OK.
11. When the message “Command Issued” appears confirming
that the download is complete, click OK to clear the
message.
Test printing the overlay
1. Click on the printer icon for the relevant printer and
choose Printers > Test Form.
2. In the Test PostScript Form window, to test each overlay
select it and click OK. There will be a short pause while the
printer processes the form, and then it will print.
3. When each overlay has been tested, click Exit.
4. Click the standard Windows Close (X) button, or choose
Projects > Exit to close Storage Device Manager.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
