To Next Page

To Previous Page

Network User’s Guide

5. Type 1 and press the Enter key. Perform the following

settings:

Please select (1- 99)? 1

No. Message Value

1 : TCP/ IP protocol : ENABLE

2 : IP address : 192.168.20.127

3 : Subnet Mask : 255.255.255.0

4 : Gateway address : 192.168.20.1

5 : RARP protocol : DISABLE

6 : DHCP/ BOOTP protocol: DISABLE

7 : Auto IP Address : DISABLE

8 : DNS Server (Pri.) : 0.0.0.0

9 : DNS Server (Sec.) : 0.0.0.0

10 : root password : “******“

11 : Auto Discovery Setup

99 : Back to prior menu

Please select (1- 99)?

6. Logout from the network interface. Turn the printer off

for about 15 seconds and on again to validate the

settings.

LPD Printing

Line Printer Daemon (LPD) is the most common protocol for

printing with TCP/IP to a network printer. Refer to the

workstation’s manual for details of lpr and lp commands. The

following explanation in this section uses the printing of print

file test.prn with printer name Myprinter_lp as an example.

Logical printers

The printer’s network interface includes three logical printers.

• lp must be used for printing a file created using the printer

driver.

Oki C3000 Series User Manual

Other manuals for Oki C3000 Series