Loading paper > 12
L
OADING
PAPER
C
ASSETTE
TRAYS
1. Remove the paper tray from the printer.
2.
Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all
sheets are properly separated, then tap the edges of the stack on a flat surface to
make it flush again (3).
3. Load paper long edge feed (LEF) (letter headed paper - face down and top edge
towards the right of the printer) (1) up to mark (a).
4. Adjust the rear stopper, paper guides (2) and cassette tray roller (3) to the size and
orientation of paper being used. For A6 paper, remove and re-install in the A6
position.
1
2
3
a
2
1
3
To Next Page
Loading...
Need help?
General
