Specifications > 93
Print accuracy Start: ±2 mm
Paper skew: ±1 mm/100 mm
Image expansion/compression: ±1 mm/100 mm
Interfaces
Universal Serial Bus
(USB)
Network
Parallel Interface (830
only)
USB specification Version 2.0
Connection: USB type B
Cable: USB specification version2.0 (shielded)
Transmission mode: High speed (480Mbps + 0.25% maximum)
10 Base T, 100 Base TX
36 pin Centronics type, receptacle - IEEE 1284-1994
Duty cycle 50,000 pages per month max., 10,000 pages per month average
MTBF 100.000 pages
MTTR 20 minutes
Toner l ife
b
Starter:
CMYK:
2,000 images (750 images used to initially charge image drum)
Replacement:
CMYK: 8,000 images
Image drum life 20,000 Letter/A4 pages average
Belt life 80,000 Letter/A4 pages at 3 pages per job-
Fuser life 100,000 Letter/A4 pages at 3 pages per job-
Power supply 220 to 240VAC @ 50/60 Hz ± 2%
Power consumption Operating: 1350W peak; 570 W av. (25°C)
Idle: 200 W typical (25°C)
Power saving
c
: <15W (C810)<17W (C830)
Operating environment Operating 10 to 32 °C/20 to 80% RH
(optimum 25 °C wet, 2 °C dry)
Off: 0 to 43 °C/10 to 90% RH
(optimum 26.8 °C wet, 2 °C dry)
Print environment 30 to 73% RH @ 10 °C; 30 to 54% RH @ 32 °C
10 to 32 °C @ 30% RH; 10 to 27 °C @ 80% RH
color 17 to 27 °C @ 50 to 0% RH
Noise Levels Operating: Mono/color - less than 54dBa
Standby Mode: less than 37dBa
Power Saving Mode: Background level
a. Exit method is limited by paper size, media weight and paper feed.
b. As defined by ISO/IEC 19798
c. To comply with the requirements of Energy Star, when no data is present for a set period of time,
the printer goes into a power-saving mode. The printer has a “wake-up” feature which, when
initiated from a host device or the operator panel, will revert the printer to its “running” mode.
Specifications subject to change without notice. All trademarks acknowledged.
ITEM SPECIFICATION
To Next Page
Loading...
Need help?
General
