Chapter 1 Maintenance Procedures – Printer
1.1 Exterior Cleaning
Clean inside and outside of the printer with a clean dry cleaning cloth and small vacuum cleaner
as required.
Note! Be careful not to touch the image drum terminals, the LED lens array and the LED head
connectors.
Turn OFF the power of the MFP.
Turn off the power switch on the printer.
Clean the surface of MFP.
Note! Do not use any liquid other than water and neutral
detergent. The MFP requires no lubrication.
1.2 Cleaning the LED lens array
Lift the scanner.
Press the top cover open button and lift in the direction indicated.
3