- 200 -
9. Troubleshooting
Print Problems
This section describes problems with printing from a computer.
• If you cannot solve a problem with the following solutions, contact your dealer.
• For problems caused by an application, contact the manufacturer of the application.
• Unable to Print
• Network Connection Problems (Print) (Advanced Manual)
• Wireless LAN Connection Problems (If Wireless LAN Module is Fitted) (Print) (Advanced
Manual)
• USB Connection Problems (Advanced Manual)
• Common to Windows and Mac OS X
• For Windows
Unable to Print
Cause Solution Reference
The machine is in Sleep mode or
Deep Sleep mode.
Press the (POWER SAVE) button
to enter standby status.
Saving Power Consumption
with the Power Save Function
The machine is turned off. Turn on the machine.
Turning On the Machine
A LAN cable or USB cable is
unplugged.
Check that the cable is plugged into
the machine and computer properly.
Connecting a LAN Cable/USB
Cable
There may be a problem with a
cable.
Replace the cable with a new cable. -
The machine is offline. Press the (PRINT) button, and
then select [Online].
-
An error message is displayed on the
touch panel.
Check the error messages displayed
on the touch panel or press [?] on the
touch panel.
Error Message List
The interface setting is disabled. Whether there is a consistency with
the machine's settings and the
network connection environment,
check the settings of the interface that
you are using on the touch panel.
Connecting a LAN Cable/USB
Cable
Connecting to a Wireless LAN
(Only When the Wireless LAN
Module is Mounted)
There is a problem with the print
function.
Check if the menu map can be
printed.
Checking the Information of the
Machine (Advanced Manual)
The power switch LED lamp quickly
flashes at approximately 0.3-second
intervals.
A malfunction may occur in the
machine. Unplug the power cord
immediately, and then contact your
dealer.
-
Cause Solution Reference
The machine is not set as the default
printer.
Set the machine as the default printer.
Right-click the [OKI MC573 *] icon on
the [Devices and Printers] folder, and
then select [Set as Default Printer].
* Indicates the driver type. (ex. PCL6/
PS/XPS/FAX)
-
The output port of the printer driver is
incorrect.
Select the output port for connecting
the LAN cable or USB cable.
-
To Next Page
Need help?
General
Weight and Dimensions
