22 Microline 420/421 User’s Guide
Print Quality
Important!
Front panel settings for print quality and character pitch are
normally overridden by software commands.
Press PRINT QUALITY (1) to select:
UTL: Utility—the default
• Medium quality, medium speed (380 cps)
• Gothic typeface only
HSD: High Speed Draft
• Lower quality, higher speed (507 cps)
• Gothic typeface only
SSD: Super Speed Draft
• Lowest quality, highest speed (570 cps)
• Gothic typeface only
NLQ: Near Letter Quality
• Highest quality, slowest speed (95 cps)
• Courier or Gothic
To Next Page
Loading...
Need help?
General
