yellowblue
6-45
Cleaning Vinyl
Use warm water and a clean cloth.
D
Rub with a clean, damp cloth to remove dirt. You
may have to do it more than once.
D
Things like tar, asphalt and shoe polish will stain if
you don’t get them off quickly. Use a clean cloth and
a vinyl/leather cleaner. See your dealer for
this product.
Cleaning Leather
Use a soft cloth with lukewarm water and a mild soap or
saddle soap and wipe dry with a soft cloth. Then, let the
leather dry naturally. Do not use heat to dry.
D
For stubborn stains, use a leather cleaner. See your
dealer for this product.
D
Never use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
D
Soiled or stained leather should be cleaned
immediately. If dirt is allowed to work into the
finish, it can harm the leather.
Cleaning the Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying reflections in the windshield
and even make it difficult to see through the windshield
under certain conditions.
Cleaning Interior Plastic Components
Use only a mild soap and water solution on a soft
cloth or sponge. Commercial cleaners may affect the
surface finish.
Care of Safety Belts
Keep belts clean and dry.
CAUTION:
Do not bleach or dye safety belts. If you do, it
may severely weaken them. In a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
To Next Page
Loading...
Need help?
General
