To Next Page

To Previous Page

BX45

CONTENTS

4-5

TRANSMITTED LIGHT BRIGHTFIELD OBSERVATION PROCEDURE

Correct assembly and adjustments are critical for the microscope to exhibit its full performance. If you are going to assemble

the microscope yourself, please read section 8, “ASSEMBLY” (pages 28 to 30) carefully.

IMPORTANT — Be sure to read this section for safe use of the equipment. —

1 NOMENCLATURE

3 USING THE CONTROLS

3-1 Base .................................................................................................................................................................................................................... 8-9

3-2 Focusing Block ...................................................................................................................................................................................... 10

3-3 Stage............................................................................................................................................................................................................ 11- 12

3-4 Observation Tube ...................................................................................................................................................................... 13 - 14

1 Placing the Specimen; 2 Adjusting the X- and Y-Axis Knob Tension;

3 Rotating the Stage

3-5 Condenser .......................................................................................................................................................................................... 15-16

1 Centering the Condenser; 2 Compatibility of Objectives and Condensers

3-6 Immersion Objectives .................................................................................................................................................................. 17

1 Using Immersion Objectives

3-7 Objectives with Correction Collar .............................................................................................................................. 17

3-8 Marker (U-MARKER)........................................................................................................................................................................ 18

4 OBSERVATION METHODS

4-1 Transmitted Light Phase Contrast Observation .......................................................................... 18-19

4-2 Transmitted Light Darkfield Observation......................................................................................................... 20

4-3 Transmitted Light Simple Polarization Observation......................................................................... 21

5 TROUBLESHOOTING GUIDE

6 SPECIFICATIONS

6-7

8-18

18-21

22-24

25-26

1 Voltage Indication; 2 Using the Light Intensity Preset Switch; 3 Using the Filters

1 Replacing the Fine Adjustment Knob;

2 Adjusting the Coarse Adjustment Knob Tension;

3 Pre-focusing Lever