54
5
Useful functions
Copying pictures to a card (BACKUP)
You can copy (backup) all the image data stored in the internal memory to
the card. The image data in the internal memory is not erased by copying
it to the card.
The card is required to use the backup function. Operate the camera
with the card inserted.
[BACKUP] i
g“How to use the menus” (P. 14)
1 Select [YES], and press i.
• All image data stored in the internal
memory is copied to the card.
• Press to exit the menu.
Note
• When the card has insufficient memory, [CARD FULL] is displayed and copying
is canceled.
• When the f mark is blinking, pictures cannot be backed up because of
insufficient battery power.
• If the battery power runs out during copying, the image data may be lost or
damaged. You are recommended to use the AC adapter.
• Never open the battery compartment/card cover, remove the batteries, or
connect or disconnect the AC adapter during copying as this may cause
malfunction of the internal memory or the card.
To Next Page
Loading...
Need help?
General
