Getting to know your camera better
EN 49
This camera uses several lamps to indicate the camera status.
• Performing any of the following operations when not actually taking pictures can
deplete the battery power.
• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom
• To save battery power, turn off the camera whenever it is not in use.
• Some items may not be selectable from the menus when using the arrow pad.
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
[%], [#], etc.
• Some functions cannot be used when there is no card in the camera.
[PANORAMA]/[FORMAT]/[BACKUP]/[PRINT ORDER]
Image quality is a combination of desired image size and compression level. Use the
following examples to help determine the optimal record mode when shooting.
To make high quality prints on full-size paper such as A3 (16.5×11.7 in.)/To edit
and process images on a computer
• [SHQ] or [HQ]
To print on A4 (11.7×8.5 in.) or postcard-size (6×4 in.) size paper
•[SQ1]
To send as an e-mail attachment or post on a Web site
•[SQ2]
To express the broadness of a subject such as landscapes/To view pictures on
a wide-screen television
•[16:9]
g “IMAGE QUALITY Changing the image quality” (P. 19)
Lamp indicators
Lamp Status
Self-timer lamp The lamp lights for approximately 10 seconds, blinks for
approximately 2 seconds, and then the picture is taken.
Card access lamp Lit (red): Shooting mode and power is on.
Lit (green): Playback mode and power is on.
Off: Power is off.
Blinking (red): An image or movie is being recorder or
downloaded (when connected to a computer).
• Do not do any of the following while the card access lamp is
blinking. Doing so may prevent the image data from being
saved and render the internal memory or card unusable.
• Open the battery/card compartment cover
• Remove the battery
• Connect or disconnect the AC adapter
Green lamp of the
monitor
Lit: The focus and exposure are locked.
Blinking: The focus is not locked.
• Release your finger from the shutter button, re-position the AF
target mark on the subject and press the shutter button
halfway again.
Extending the useful life of the battery
Functions that cannot be selected from menus
Selecting the appropriate image quality
To Next Page
Loading...
Need help?
General
