64 EN
Miscellaneous
1
Turn off the camera.
2
Open the battery compartment/card
cover.
Inserting the card
3
Orient the card as shown, and insert it
into the card slot as shown in the illustration.
•
Insert the card straight in.
•
Insert the card until it clicks into place.
Removing the card
3 Push the card all the way in and release
slowly.
4
Close the battery compartment/card cover.
Note
•
The card access lamp blinks while the camera is reading the images. Reading of images may
take some time. Do not open the battery compartment/card cover while the card access lamp is
blinking. Doing so may damage the data in the internal memory or the card and render the
internal memory or card unusable.
Inserting and removing the card
•
The card protrudes slightly and stops.
•
Grasp the card and remove.
Battery compartment/card cover
1
2
Notch
Contact area
1
2
d4314_15_e.book Page 64 Monday, June 26, 2006 7:13 PM
To Next Page
Loading...
Need help?
General
