41
EN
For information on using the menus, see “Using the Menu” (p. 4).
Menus for Other Camera Settings
Menus for Other Camera Settings
Erasing data completely
[Memory Format]/[Format]
r (Settings 1) X Memory Format/Format
Before formatting, check that no important data is left
in the internal memory or card.
Cards must be formatted with this camera before
fi rst use or after being used with other cameras or
computers.
Submenu 2 Application
Yes
Completely erases the image data
in the internal memory
*1
or card
(including protected images).
No Cancels formatting.
*1
Be sure to remove the card before formatting the
internal memory.
Copying images in the internal memory
Copying images in the internal memory
to the card [Backup]
r (Settings 1) X Backup
Submenu 2 Application
Yes
Backs up image data in the internal
memory to the card.
No Cancels the backup.
It takes some time to back up data. Check that
the battery has suffi cient power before starting the
backup.
Selecting a method for connecting the
Selecting a method for connecting the
camera to other devices
[USB Connection]
r (Settings 1) X USB Connection
Submenu 2 Application
Auto
When the camera is connected to
another device, the settings selection
screen is displayed.
Storage
Select when transferring images to a
computer or when using the supplied
software with the camera connected
to a computer.
MTP
Select when transferring images to
a computer running Windows Vista
or Windows 7 without using the
supplied software.
Print
Select when connecting to a
PictBridge-compatible printer.
Copying pictures to a computer without
Copying pictures to a computer without
using the supplied software
using the supplied software
This camera is compatible with the USB Mass
Storage Class. You can transfer and save the image
data on your computer while the camera and the
computer are connected.
System requirements
Windows
Windows XP (Service Pack 1 or later) /
Windows Vista / Windows 7
Macintosh Mac OS X v10.3 or later
To Next Page
Loading...
Need help?
General
