To Next Page

To Previous Page

Using Your Monitor without a Smart Device

3.1 Taking a Measurement

You can use your monitor without pairing to a smart device. To pair

your monitor with a smart device, refer to sub-section 4.1.

Note

•To stop the measurement, press the [START/STOP] button once to

deflate the arm cuff.

Caution

• DO NOT use this monitor with other medical electrical (ME) equipment

simultaneously. This may result in incorrect operation of the monitor and/or

cause an inaccurate reading.

• Remain still and DO NOT talk while taking a measurement.

1. Press the [START/STOP] button.

All symbols appear on the display before starting the

measurement.

2. Remain still and do not talk until the entire

measurement process is complete.

The “ ” symbol flashes at every heartbeat.

After your monitor has detected your blood pressure and

pulse rate, the cuff automatically deflates. Your blood

pressure and pulse rate are displayed with the previous

reading.

If either the systolic or the diastolic reading is high (refer to

sub-section 1.3), the “ ” symbol appears.

INFLATING

START

COMPLETED

Omron 7 Series User Manual

Questions and Answers: