Omron BN75R User Manual

BN75R/BN150R/BN300Rs
3
28
●
Operation during recovery from a power failure
• The unit automatically resumes output via commercial power if it recovers from a pow er
failure/input power supply error while it is providing power supply output. The spent battery
starts charging.
• If a power failure or abnormal power input is resolved after the battery is discharged completely
and power output is stopped, the UPS restarts automatically and resumes power output. The
expended battery begins to charge.
See also
“Setting” - “Boot Settings” - “Auto Reboot” in the menu on the LCD can be used to enable
or disable auto restart.
●
Stop procedure
Operation
Press and hold the power switch of the UPS for 3 seconds or longer.
• The power output from the UPS stops.
• Even if you turn off the power switch, if AC is supplied from commercial power, the battery is
automatically charged.
Status
indicator
Beep Output Charging Description
None OFF ON Power switch OFF
3-3 Interpreting beeps and displays
No. Icon Mode Beep Discription Solution
1
Standby
mode
None There is AC input
Power switch is OFF
-
2
Line mode None Power switch is ON Operating
normally
-
3
AVR mode None Operating normally with AVR
operation
-
4
ECO
mode
None Operating normally with ECO
operation
-
5
Bypass
mode
None Commercial power is being
output directly in Bypass Mode.
Check the displayed message
6
Test mode None Self-diagnostic test in progress Returns to Commercial Power
Mode when determined to be
normal in the test.
7
UPS event None Warning (alarm) has occurred. Check the displayed message

Omron BN75R Specifications

General

Brand	Omron
Model	BN75R
Category	UPS
Language	English