Omron BP710 User Manual

16
USING THE MEMORY fUNCTION
Every time you complete a measurement the monitor stores the blood pressure and pulse
rate in the memory. The monitor automatically stores up to 14 sets of measurement values
(systolic pressure, diastolic pressure, and pulse rate). When 14 sets of measurement
values are stored, the oldest record is deleted to save the most recent values.
1. Press the Memory (M) button.
The most recent set of measurement values appears on the display.
The values are displayed from the most recent to the oldest.
NOTE: The number of the reading stored in the memory appears for a second
before the pulse rate is displayed. The newest set is numbered “1”.
2. Press the START/STOP button to turn the unit off.
TO DELETE ALL THE VALUES STORED IN MEMORY
You cannot partially delete values stored in the memory. All values will be deleted.
1. Press the Memory (M) button.
Then while holding it down, press the START/STOP button down for more than 2
seconds until the display appears as illustrated below.
2. Press the START/STOP button to turn the unit off.
NOTE:Themonitorwillautomaticallyturnoffafterveminutes.

Omron BP710 Specifications

General

Type	Automatic
Cuff size	420 cm
Display type	LCD
Date imprinting	Yes
Placement supported	Upper arm
Mean arterial pressure	-
Battery type	AAA
Battery voltage	1.5 V
Number of batteries supported	2

Weight and Dimensions

Depth	64 mm
Width	128 mm
Height	104 mm