Omron BP710 User Manual

18
ERROR INDICATORS
SYMBOL CAUSE CORRECTION
Monitor could not
detect pulse wave.
Take another measurement and
remain still until the measurement
is complete.
Cuffunder-inated.
Cuff not applied
correctly.
Remove the arm cuff.
Read “Taking a Measurement”.
Wait 2-3 minutes.
Take another measurement.
Cuffover-inated.
Batteries are worn.
Replace the four batteries. Refer to
“Battery Installation”.
Device error. Contact Customer Service.

Omron BP710 Specifications

General

Type	Automatic
Cuff size	420 cm
Display type	LCD
Date imprinting	Yes
Placement supported	Upper arm
Mean arterial pressure	-
Battery type	AAA
Battery voltage	1.5 V
Number of batteries supported	2

Weight and Dimensions

Depth	64 mm
Width	128 mm
Height	104 mm