Omron BP742N User Manual

USING THE DEVICE
19
3. Remove the arm cuff.
4. Press the START/STOP button to turn the monitor off.
The monitor automatically stores the measurement result in its memory.
It will automatically turn off after 2 minutes.
Note: Wait 2-3 minutes before taking another measurement. Waiting
between
measurements allows the arteries to return to the condition
prior to taking a measurement.
Using the Guest Mode
The monitor stores measurement values for 2 users in the memory. 
The guest mode can be used to take a single measurement for another user.
No measurement values are stored in the memory when the guest mode is selected.
1. Press and hold the START/STOP
button for more than 3 seconds.
The USER ID symbol and the Date/Time
display will disappear.
2. Release the START/STOP button when the Date/Time
display turns off.
The arm cuff will start to inflate automatically.
DO NOT adjust medication based on measurement
results from this blood
pressure monitor. Take medication as prescribed by your physician. Only a
physician is qualified to diagnose and treat High Blood Pressure.
This device is not intended to be a diagnostic device.

Omron BP742N Specifications

General

Type	Automatic
Cuff size	23 - 43 cm
Product color	White
Memory function	Yes
Number of users	2 user(s)
Memory registers	100
Placement supported	Upper arm
Mean arterial pressure	No
Quantity per pack	1 pc(s)
Display type	Analog