EasyManuals Logo
Home>Omron>Blood Pressure Monitor>BP7450CAN

Omron BP7450CAN User Manual

Omron BP7450CAN
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
32
5. Using Memory Function
Your monitor automatically stores up to 100 readings per user.
Note
This monitor can be used by multiple users. Refer to sub-section 2.8
to switch user. Make sure which user ID stores your own readings.
5.1 Viewing the Readings Stored in Memory
1. Select your user ID.
2. Press the button.
After a memory number appears, the latest reading will
appear with a past reading. A past reading will appear in the
comparison display on the left.
Note
If the reading is high (refer to sub-
section 1.3), the “ symbol
appears.
If there are no readings stored in
the memory, the screen to the right
is displayed.
If the memory is full, new readings
will replace the old readings, starting with the oldest reading.
1 sec.
Memory number
Past reading Latest reading
Alternating
date/time
display
If the latest reading was
taken in TruRead mode,
the “ ” symbol
appears and the reading
shown on the right is the
average of 3 measurements.
If the past reading was
taken in TruRead mode,
the “ ” symbol appears
and the reading shown
on the left is the average
of 3 measurements.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Omron BP7450CAN and is the answer not in the manual?

Omron BP7450CAN Specifications

General IconGeneral
BrandOmron
ModelBP7450CAN
CategoryBlood Pressure Monitor
LanguageEnglish

Related product manuals