56
DIN Track Mounting Bracket The DIN Track Mounting Bracket shown below is necessary for mounting the PC
to the DIN Track.
DIN Track The following DIN Tracks are available.
Model Specification
PFP-50N 50 cm long, 7.3 mm high
PFP-100N 1 m long, 7.3 mm high
PFP-100N2 1 m long, 16 mm high
Procedure
1, 2, 3... 1. The following diagram is a view of the back of the Backplane. Attach one
Mounting Bracket to the left and right sides of the Backplane as shown
below.
DIN Track Mounting
Bracket
There are two Backplane mounting screws each on the left
and right sides of the Backplane. Use these screws to attach
the DIN Track Mounting Brackets to the Backplane.
Backplane
Installation Environment Section 3-1
To Next Page
Loading...
Need help?
General
