Omron fh series Startup Guide

8
5. Applicable Devices and Device Configuration
5.1. Applicable Devices
The applicable devices are as follows:
Manufacturer Name Model
OMRON Programmable Multi-Axis Controller
Model CK3E-
□□□□
OMRON Programmable Multi-Axis Controller Model CK3M-CPU11
OMRON Programmable Multi-Axis Controller
Industrial Box PC
Model NY51□-A□□□
OMRON FH Sensor Controller Model FH-1/FH-1-
Model FH-3/FH-3-
OMRON
0.3 megapixel digital camera
0.3 megapixel compact digital camera
0.3 megapixel compact digital camera,
pen type
0.3 megapixel high-speed camera
0.3 megapixel high-speed CMOS camera
2 megapixel digital camera
2 megapixel high-speed CMOS camera
4 megapixel high-speed CMOS camera
5 megapixel digital camera
Intelligent camera
Intelligent compact camera
Auto-focus camera
Model FZ-SC/S
Model FZ-SFC/SF
Model FZ-SPC/SP
Model FZ-SHC/SH
Model FH-SC/SM
Model FZ-SC2M/S2M
Model FH-SC02/SM02
Model FH-SC04/SM04
Model FZ-SC5M2/S5M2
Model FZ-SLC15/SLC100 Model
Model FZ-SQ010F/SQ050F
/SQ100F/SQ100N
Model FZ-SZC15/SZC100
OMRON
Camera Cable Model FZ-VS□
Precautions for Correct Use
In this document, the devices with models and versions listed in Section 5.2 are used as
examples of applicable devices to describe the procedures to connect the devices and check
their connections.
You cannot use devices with versions lower than the versions listed in Section 5.2.
To use the devices mentioned above with models not listed in Section 5.2 or versions higher
than those listed in Section 5.2, check the differences in the specifications by referring to the
manuals before operating the devices.
Additional Information
This document describes the procedures to establish the network connections. It does not
provide information on operations, installations, wiring methods, device functionalities, or
device operations, which are not related to the connection procedures. For more information,

Omron fh series Specifications

General

Brand	Omron
Model	fh series
Category	Machine Vision Systems
Language	English