Omron H7CC-A Series User Manual

H7CC
2
Other Features
Equipped with a Key Protect Function
Any abnormality in the device due to malfunctioning or setting errors
can be prevented.
Follows the Ratings, Characteristics, and
Functionality of the H7CX-N
The H7CC follows the ratings, characteristics, and functionality of the
H7CX-N. Other than the H7CC-A8@, all models are equipped with
power supply to external devices, which reduces the load on wiring.
Output Allocation Function
The allocation of outputs 1 and 2 (OUT1 and OUT2) can be changed.
In the conventional 2-stage output models, output 1 (OUT1) was fixed
as SPST, and output 2 (OUT2) was fixed as SPDT, however, in the
H7CC, the allocation of outputs 1 and 2 (OUT1 and OUT2) can be
changed to SPST or SPDT, which reduces the man-hours involved
when it is necessary to change the wiring.
Output ON/OFF Inversion Function
Conventionally, the output turns ON when the set value is reached,
however, when this function is used, the output can be turned OFF
when the set value is reached. As a result, the man-hours involved in
checking the wiring can be reduced.
Memory Backup Function
Conversion from the H7CN/H7AN is supported by enabling the
setting of the present value and the output state memory backup.
H7AN Compatibility Function
Conversion from the H7AN is supported by enabling the setting to
start counting from 999999 when the present value being
decremented exceeds 0.
Model Number Structure
Model Configuration
* Set the tachometer input mode from the function setting mode to switch to the tachometer function.
12 13
Output 1
(OUT1)
Output 2
(OUT2)
Output 2
(OUT2)
Output 1
(OUT1)
345
12 13
345
H7CC Series
Model
H7CC-A Series Digital Counter H7CC-R Series Digital Tachometer
Classification Preset counter Preset counter/Tachometer Tachometer
Model H7CC-A@ H7CC-AW@/AU@ H7CC-R11@ H7CC-R11W@
Function
1-stage preset counter Yes Yes No
2-stage preset counter No Yes No
Total and preset counter Yes Yes No
Batch counter No Yes No
Dual counter No Yes No
Twin counter No Yes No
Tachometer No Yes * Yes
Tachometer Input ---
1 input or 2 inputs
(independent measurements,
differential, absolute ratio
value and error ratio value)
Yes
1 input
Yes
2 inputs
(independent measurement
only)
Settings 1-stage 2-stage 1-stage
External connections
8-pin socket, 11-pin socket,
Screw terminals
Screw terminals 11-pin socket
Display digits 6 digits

Omron H7CC-A Series Specifications

General

Brand	Omron
Model	H7CC-A Series
Category	Measuring Instruments
Language	English