31
8.Technical Data
EN
8. Technical Data
Note: Subject to technical modification without prior notice
• This OMRON product is produced under the strict quality system of OMRON
HEALTHCARE Co. Ltd., Japan. The Core component for OMRON blood
pressure monitors, which is the Pressure Sensor, is produced in Japan.
• Disposal of this product and used batteries should be carried out in
accordance with the national regulations for the disposal of
electronic products.
This device fulfils the provisions of EC directive 93/42/EEC (Medical Device Directive).
This blood pressure monitor is designed according to the European Standard
EN1060, Non-invasive sphygmomanometers Part 1: General Requirements and
Part 3: Supplementary requirements for electromechanical blood pressure
measuring systems.
Caution: Please read the instruction manual carefully
before using the device.
Product Description
Digital Automatic Blood Pressure Monitor
Model
OMRON M2 (HEM-7117-E/HEM-7117-E8)
Display
LCD Digital Display
Measurement Method
Oscillometric method
Measurement Range
Pressure: 0 mmHg to 299 mmHg
Pulse: 40 to 180/min.
Memory
21 Measurements
Accuracy
Pressure: ±3 mmHg
Pulse: ±5% of display reading
Inflation
Automatic by electric pump
Deflation
Automatic pressure release valve
Power Source
4 “AAA” batteries 1.5V or AC/ DC adapter
(optional, 6V 4W)
Battery Life
Capacity of new alkaline batteries is approx. 300
measurements
Operating Temperature/
Humidity
10°C to 40°C/ 30 to 85% RH
Storage Temperature/
Humidity/ Air Pressure
-20°C to 60°C/ 10 to 95% RH/ 700-1060 hPa
Console Weight
Approximately 289g without batteries
Cuff Weight
Approximately 120g
Outer Dimensions
Approximately 104 (w) mm × 84 (h) mm × 129 (l) mm
Cuff Dimensions
Approximately 146 mm × 446 mm
(Medium cuff: arm circumference 22 to 32 cm)
Cuff material
Nylon
Package Content
Main unit, medium cuff, instruction manual, storage
case, battery set, guarantee card, blood pressure pass
HEM-7117-E_A_M.fm Page 31 Thursday, October 28, 2010 2:40 PM
To Next Page
Loading...
Need help?
General
