Omron NX-SID800 Manual

NX-CSG/SL5/SI/SO
22
End Cover NX-END02 SD Memory Card HMC-SD291/SD491
Related Manuals
65.2＊
71
6
100
1.5
1.5
* The dimension from the attachment surface of the DIN
T
rack to the front surface of the end cover.
2.1±0.15
32±0.1
24±0.1
Related Manuals Cat. No. Model numbers Application Description
NX-series
Safety Control Unit /
Communication Control Unit
User’s Manual
W584I-E-01
NX-SL5
NX-SI
NX-SO
NX-CSG
Learning how to use the NX-series
Safety Control Units and
Communications Control Units.
Describes the hardware, setup methods, and
functions of the NX-series Safety Control Units and
Communications Control Units.
NX-series
Communication Control Unit
Built-in Function
User’s Manual
W583I-E-01
NX-CSG
Learning about the built-in functions
of an NX-series Communications
Control Unit.
Describes the software setup methods and
communications functions of an NX-series
Communications Control Unit.
NX-series
Safety Control Unit
Instructions Reference Manual
W582I-E-01
NX-SL
Learning about the specifications
of instructions for the Safety CPU
Unit.
Describes the instructions for the Safety CPU Unit.
NX-series
Data Reference Manual
W525-E1-09
NX-
Referencing lists of the data that is
required to configure systems with
NX-series Units.
Lists of the power consumptions, weights, and other
NX Unit data that is required to configure systems with
NX-series Units are provided.
Sysmac Studio Version 1
Operation Manual
W504-E1-19
SYSMAC-SE2
Learning about the operating
procedures and functions of the
Sysmac Studio.
Describes the operating procedures of the Sysmac
Studio.
NX-series
System Units
User’s Manual
W523
NX-PD1
NX-PF0
NX-PC0
NX-TBX
Learning how to use NX-series
System Units.
The hardware and functions of the NX-series System
Units are described.

Omron NX-SID800 Specifications

General

Brand	Omron
Model	NX-SID800
Category	Controller
Language	English