14
3.Using the Unit
3.3 Taking a Reading
1. Press the O/I START button to
start measurement.
The wrist cuff will start to inflate
automatically after the power is
turned on.
2. After the unit has detected your
blood pressure and pulse rate,
the cuff automatically deflates and your blood pressure
and pulse rate are displayed.
Notes:
• Sit still and do not talk or move until the measurement is
completed.
• Keep the unit at heart height until the measurement is
completed.
• To stop measurement, press the O/I START button at any
time during measurement.
HEM6021-E.book Page 14 Friday, July 22, 2005 11:08 AM
To Next Page
Loading...
Need help?
General
