20
5. Handling Errors and Problems
5.1 Error Messages
Error Symbol Cause Correction
Cuff over
inflated.
Repeat measurement.
Remain still and do not move
during measurement. (Refer
to section 3.3.)
Movement
during
measurement.
The wrist cuff is
not fastened
securely.
Carefully read and repeat the
steps listed under section 3.1.
An E mark with
a code/number
indicates the
device has a
hardware
failure.
Consult your OMRON
retail outlet or distributor.
The battery
power is low.
Replace the batteries with
two new “AAA”
alkaline
(LR03) batteries.
Blinks or appears
continuously
HEM6021-E.book Page 20 Friday, July 22, 2005 11:08 AM
To Next Page
Loading...
Need help?
General
