1-18
1-6 Unit Versions
1
OMNUC G5-SERIES AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
Features and System Configuration
1-6 Unit Versions
The G5-series Servo Drive uses unit versions.
Unit versions are used to manage differences in supported functions when product upgrades
are made.
Confirmation Method
The unit version of a G5-series Servo Drive is given on the product’s nameplate as shown
below.
Unit Versions
Unit version Upgraded content
Supported
CX-Drive versions
Not indicated New release Ver. 1.80 or higher
Ver.1.1
Alarm 27.2 detection conditions have been
changed to support the increase of encoder
resolution in the G series.
Ver. 1.80 or higher
Ver.1.2
European area compliance
No changes to existing Ver. 1.1 functions
Ver. 1.80 or higher
(R88D-KTA5L)
Nameplate
location
Unit Version
Here, the unit version is 1.2.
Product Nameplate
To Next Page
Loading...
Need help?
General
