Featuring a new undervoltage alarm with a unique
troubleshooting function, S8VM power supplies provide not
only a clear indication that a DC output voltage drop has
occurred, but also indicate the likely cause – allowing fast,
effective corrective action to be taken.
The S8VM series is also designed for direct, easy DIN-rail
mounting. And supporting today’s trend towards ever-greater
downsizing in industrial equipment, the series comes in
a new ultra-compact housing that, depending on output
power, can be up to 40% smaller than conventional ‘compact’
power supplies.
Excellent reasons then, for choosing Omron’s new S8VM
power supplies. Designed by Omron to provide optimum
quality management of your industrial processes and ease
of maintenance.
Industrial power supplies must meet the same high
standards of robustness and reliability as the machines
in which they operate. Failures, resulting in interrupted
processes and lost production, are expensive and must
be corrected as fast as possible to minimise machine
downtime. Here’s where Omron’s new S8VM industrial
Switch Mode Power Supply series comes in.
Just a single click onto a DIN-rail.
Moulded plastic front cover
eliminating any possibility of electric shock due
to fingers touching high-voltage parts.
Screw-terminal block
providing additional
finger protection.
Undervoltage alarm/LED indication.
New ultra-compact housing.
Connector for signal output
of undervoltage alarm.
For fast and accurate action
to minimise machine downtime
To Next Page
Loading...
Need help?
General
