82
5 Editing Your Settings
Editing time and date
You can adjust the meter's time and date settings after
first time setup. Press and hold to turn the meter on,
then press and hold and at the same time. The SET
screen will appear, and the hour will flash.
For instructions on adjusting the time and date, see
page25.
After adjusting the settings, you will exit settings mode
and your last glucose result screen will appear. The
adjusted time and date will be displayed once a new
glucose test has been completed and the result appears
on the screen.
NOTE: You will not be able to perform a blood glucose
test until you finish editing the time and date.
NOTE: The OneTouchReveal
®
Mobile App on your
compatible wireless device checks and updates the time
and date in your meter each time you sync. Check the
time and date often on your compatible wireless device
to be sure they are correct. See the App instructions for
more information.
To Next Page
Loading...
Need help?
General
