EasyManuals Logo
Home>Onkyo>CD Player>C-705X

Onkyo C-705X User Manual

Onkyo C-705X
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
REMOTE
CONTROL
Connecting to the other components
Connecting the connector
If you are using other ONKYO components equipped
with
connectors, you can control these com-
ponents using the amplifier‘s remote controller.
Before connecting
The amplifier must be connected in the
system hookups for control operations.
Each component has two
connectors. There
is no difference between those connectors.
The components may be connected in any order.
Remote control operation is not possible if only
the
remote control cable is connected to
the
connectors. Connect the audio connec-
tion cables correctly.
The illustration below is the
hookup example.
With these hookups, you can operate the CD Syn-
chro Recording (see “CD/MD synchro recording”
on page 8).
C-705X
Tuner
Cassette Tape Deck
Amplifier
cable
cable
Supplied
cable
Connecting the power cord
Insert the AC power cord into a wall
outlet. The STANDBY indicator lights.
STANDBY
STANDBY/ON
To use the unit with the other Onkyo Sepa-
rate Collection series components, follow the
connection diagram in the A-905X instruc-
tion manual to connect the unit to the sys-
tem.
If you press the
(OPEN/CLOSE) button while
the unit is in the STANDBY mode, the power
will turn on and the display will light up auto-
matically.
To wall outlet
Note
An
remote control cable equipped with a 1/
8 in. (3.5mm) diameter miniature two-conductor
phone plug is included with this unit and with ev-
ery tuner and cassette deck that bears the
mark.
Light

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Onkyo C-705X and is the answer not in the manual?

Onkyo C-705X Specifications

Audio Specifications IconAudio Specifications
sampling frequency352.8 kHz
frequency response5 Hz – 20 kHz
total harmonic distortion0.005% (at 1 kHz)
dynamic range96 dB
signal to noise ratio90 dB
channel separation85 dB (at 1 kHz)
output level2 volts r.m.s.
Power IconPower
power consumption (230 V, 50 Hz model)8 watts
power consumption (120 V, 60 Hz model)9 watts
power supply rating (230 V, 50 Hz)AC 230 V, 50 Hz
power supply rating (120 V, 60 Hz)AC 120 V, 60 Hz
Weight and Dimensions IconWeight and Dimensions
dimensions205 x 91 x 275 mm
dimensions (inch)8-1/16" x 3-9/16" x 10-3/16"
weight2.2 kg, 4.9 lbs.

Related product manuals