En-
22
Various Playback Modes-Continued
2
Use the Previous and Next [
<
]/[
>
] buttons to
select the first file you want to add to the
playlist, and then press [ENTER] button.
Repeat this step to add additional files to the playlist.
Alternatively, you can use the number buttons on the
remote controller to select files instead of the Previ-
ous and Next [
<
]
/
[
>
] and the [ENTER] buttons.
Notes:
• If the total playing time is more than 99 min-
utes and 59 seconds, “– –:– –” appears.
• You can add up to 25 files to the playlist. If you try
to add more, the message “MEM FULL” appears.
3
To start memory playback, press the
[ENTER] button. Memory playback starts.
Alternatively, you can start playback with the
Play
[
1
]
button.
∫To Change the Display
While creating a playlist for memory playback, you
can press the [DISPLAY] button to change the dis-
play information as follows:
∫To Select Other Files During Memory
Playback
Use the Previous and Next [
:
]
/
[
9
] buttons.
∫To Check What’s on the Playlist
While playback is stopped, use the Fast Reverse
and Fast Forward [
22
]/[
11
] buttons to scroll
through the playlist.
∫To Remove Files from the Playlist
• While memory playback is stopped, press the
[CLEAR] button. Each press removes the last file
from the playlist.
• The playlist is deleted when you change the play-
back mode (i.e., when you press the [MEMORY]
button after stopping playback).
∫To Cancel Memory Playback
• Stop playback, then press the [MEMORY] button to
change the playback mode. The MEMORY indica-
tor disappears, and memory playback is cancelled.
• Memory playback is cancelled when the disc is
ejected.
Memory Playback in Navigation Mode
Memory playback can be set only when playback is
stopped.
1
Press the [MEMORY] button; the MEMORY
indicator appears.
2
Press the [
∫
] or [ ] button.
The CD Player enters Navigation mode and
“ROOT” appears on the display.
3
Press the [ENTER] button.
The first folder name in ROOT appears on the
display.
4
Use the [
<
]/[
>
] buttons to select other fold-
ers and files at the same level.
Folders that don’t contain files or subfolders
can’t be selected. Repeat steps 3 and 4 to
select the files and subfolders in that folder.
5
Press the [ENTER] button.
The first item is memorized in the playlist.
Track to be added
to the playlist
Total time of
playlist
Total playback
time of the
memorized files
Memory
number
Current play-
back time of the
selected file
Memory Playback (For MP3 CDs)
SEARCH MEMORY
SETUP
123
RANDOM REPEAT
ENTER
ENTER
MEMORY
SN29402439_C-755_En.book 22 ページ ２０１６年８月９日 火曜日 午後２時１４分
To Next Page
Loading...
Need help?
General
