> Before Start >Part Names > Install > Playback
Advanced Setup | Others
4
Front Panel
Part Names
1. TIMER indicator: This lights when the alarm is set and this unit is on standby.
2. Remote control sensor: Receives signals from the remote controller.
0 The signal range of the remote controller is within about 23y/7 m, at an angle of
30° to either side.
3. Display (ÄP8)
4. Disc tray: Place discs here. 8-cm discs can also be used.
5. < button: Open or close the disc tray.
6. Volume dial: Adjust the volume. Adjust between 0 and 50.
7. Play buttons:
∫
: Stops playback.
1
/; : Plays or pauses playback.
0 Depending on the input, the operation may not start.
8. Í ON/STANDBY button: Turns the unit on or into standby mode.
9. jack: Stereo headphones with a mini plug (Ø1/8z/3.5 mm) are connected.
10.
USB port: Connect a USB memory to play music files.
11.
DISPLAY button: Switches the information on the display.
0 Depending on the input, the operation may not start.
12.
INPUT button: Switches the input to be played. (CD / BLUETOOTH / USB /
OPTICAL / LINE / DAB (CS-375D) / FM)
13.
TONE button: Adjust the sound quality. Press the button repeatedly to select item
to adjust from “BASS”, “TREBLE” and “S.BASS”, and turn the skip (:/9) dial
to adjust.
14.
ENTER button, skip (:/9) dial:
When playing, turn left or right to select the folder or file, then press to confirm.
0 Depending on the input, the operation may not start.
While the menu is displayed, turn the dial to select items and press to confirm the
settings.
15.
RETURN button: Returns the display to the previous state.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
