Onkyo DV CP704 User Manual

27
Basic Playback—Continued
On the disc navigation window, you can select CD tracks
or MP3, WMA, or JPEG files.
Using the Disc Navigation Window
1
Load and select an audio CD or
MP3, WMA, or JPEG disc.
See page 23 and page 24.
The disc navigation window appears.
It may take a while to read the contents
of discs that contain many files and
folders.
For JPEG discs, a slideshow starts auto-
matically. To open the disc navigation
window, press the [MENU] button.
This is the display for an MP3 disc.
RETURN
ENTER
MEMORY
PLAY
STOP
TOP MENU
MENU
MP3 WMA JPEG
CD
Repeat
001. ROOT
00:00:24 00:05:06 00:05:30
/MP3 music
002. MP3 music
003. Onkyo 1
004. Onkyo 2
001. Track01
002. Track02
003. Track03
004. Track04
Ramdom
Name: Onkyo Title Artist Name: Onkyo Artist
: Off
: Off
M
P
3
M
P
3
M
P
3
M
P
3
1/10 1/8
Play 4: DATADisc
12
3
4
5
A Folder number and file number.
B Elapsed time, remaining time, and
total time of currently playing
song. (Only elapsed time is shown
for WMA files.) (See also page 41.)
C Repeat function and Random
function status.
D For JPEG files, a preview and the
file size are displayed here.
E Information about the song
currently playing (e.g., song title,
artist name, album name) is
displayed here, if available.
2
Press the Play [ ] button to start play-
back. Press the Stop [ ] button to stop
playback. Press the Pause [ ] button to
pause playback and the Play [ ] button
to resume it.
For audio CDs:
Use the Up/Down [ ]/[ ] buttons to
select a track, and press the Play [ ]
button (or [ENTER]) to start playback.
You can select the next or previous
track during playback by using the
Next [ ] and Previous [ ] buttons.
Press the Previous [ ] button to
restart the current track. Press it again
to select earlier tracks.
Alternatively, the number button is
used to select a track.
For MP3, WMA, and JPEG discs:
To open a folder, use the remote con-
troller’s Up/Down [ ]/[ ] buttons to
select it, and then press [ENTER].
Use the Up/Down [ ]/[ ] buttons to
select tracks in the open folder.
You can select the next or previous
track during playback by using the
Next [ ] and Previous [ ] buttons.
Press the Previous [ ] button to
restart the current track. Press it again
to select earlier tracks.
Use the Left/Right [ ]/[ ] buttons to
select other folders.
To close a folder (i.e., move back up the
directory tree), press the [RETURN]
button.
When all the tracks in that folder have
been played, tracks in the next folder
are played.
Remote controller

Onkyo DV CP704 Specifications

Operating Environment

Operating temperature	5° to 35° C (41° F to 95° F)

Power

Power supply (U.S. model)	120 V AC, 60 Hz
Power supply (Australian model)	100–240 V AC, 50/60 Hz
Power consumption	13 W
Power consumption in Standby mode (U.S. model)	0.35 W
Power consumption in Standby mode (Australian model)	0.35 W

Audio Specifications

Signal-to-noise ratio	95 dB
Audio dynamic range	95 dB
Total harmonic distortion	0.007% (1 kHz)
Wow and flutter	Below threshold of measurability

Video Outputs

Component video Y	1.0 V (p–p), 75 Ω, negative sync, RCA/phono x3
Component video PB/PR	0.7 V (p–p), 75 Ω
S VIDEO Y	0.7 V (p–p), 75 Ω, negative sync, 4-pin mini DIN x1
S VIDEO C	0.286 V (p–p), 75 Ω
Composite video	1.0 V (p–p), 75 Ω, negative sync, RCA/phono x1

Audio Outputs

Optical output	–22.5 dBm, optical connector x1
Coaxial output	0.5 V (p–p), 75 Ω, RCA/phono x1
Analog output	2.0 V (rms), 540 Ω, RCA/phono x2
HDMI output	19 pin connector

Weight and Dimensions

Weight	5.5 kg (12.1 lbs.)
Dimensions (W x H x D)	435 X 91 X 432 mm (17-1/8 X 3-9/16 X 17 ins.)