Onkyo DX-7333 User Manual

12
Useful Functions
NEXT SELECTION
TIME EDIT
1 – 9, 0, +10
REMOTE CONTROLLER RC-402C
PEAK SEARCH
+10 0
TIME EDIT
CLEAR
MEMORY
REPEAT
DISPLAY
78
45
12
9
6
3
NEXT
SELECTION
A–B SHUFFLE
,
1. During playback, press the NEXT SELECTION button.
2. While the “– –” is flashing, select the next desired track
using the number buttons and the +10 button.
After playing the current track, the selected track will be played.
Note:
The Memory Play or the Shuffle Play mode, if appropriate, will be
canceled before the playing of the specified track begins.
This function can be used when recording from a CD to a cassette
tape.
Make sure that you cancel the memory mode before using this
function.
1. Press the TIME EDIT button.
•
Pressing this button will change the Track Number display from
46 → 50 → 54 → 60 → 70 → 80 → 90 → 46 → .....
These numbers indicate the length of the tape.
Tape length.
The track numbers to be recorded onto side A will be displayed
in a box.
This is the total time for the tracks on side A. This changes to
the display for side B ( ) after 2 or 3 seconds. Pressing the
DISPLAY button will show the display for the A side again.
•
Each time the / buttons are pressed, the tape length will
change by 1 minute.
•
Use number buttons and + 10 button to directly enter the length
of the tape.
The maximum setting is 99 minutes.
2. Press the button.
The CD player starts playing from the first track on the disc to
be recorded onto side A.
When the last track on side A is completed, the pause mode is
automatically set.
3. Press the button again.
The pause mode is canceled and the CD player starts playing the
remaining tracks for recording onto side B.
Note:
•
The time edit mode does not function for discs with more than
20 tracks, or when the first track is longer than half the indicated
length of the tape.
•
During time edit play, buttons other than STOP, Open/close,
DISPLAY and number buttons cannot be used for input.
Selecting the next track for play
(Remote controller only)
Time edit function (Remote controller only)
a
b
c
1
2
Remote controller
+10 0
78
45
12
9
6
3
Remote controller
NEXT
SELECTION
NEXT
TOTAL REMAIN
DISC
TIME EDIT
1
2
3
45
678
1
2
Remote controller
+10 0
78
45
12
9
6
3
Remote controller
TIME EDIT
3
Remote controller
Remote controller
PAUSE
or
Remote controller
DX-7333(E)BookPage122001年4月26日木曜日10:28AM

Onkyo DX-7333 Specifications

Audio Specifications

sampling frequency	352.8 kHz
frequency response	5 Hz - 20 kHz
total harmonic distortion	0.005% (at 1 kHz)
dynamic range	96 dB
signal-to-noise ratio	90 dB
channel separation	85 dB (at 1 kHz)
number of channels	2 (stereo)

Power

power consumption	9 watts
power supply	230-240 V, 50 Hz
output level	2 volts r.m.s.

Weight and Dimensions

weight	4.0 kg (8.8 lbs.)
dimensions	435 × 91 × 314 mm (17-1/8" × 3-9/16" × 12-3/8")