5EN
2 Enter the headset password "0000" (4
zeros) if prompted. For those mobile
phones featuring Bluetooth 3.0 or
higher, no need to enter a password.
Multiple pairing
The headset has a multiple pairing feature
which can connect 2 devices simultaneously
and switch between each other.
Pair two devices manually
1 Pair your first device (see 'Manual
pairing' on page 4).
2 Press and hold the pairing/mute button
until the blue and white LED flashes
alternately.
3 Pair your second device.
4 Then you can either:
• select Onkyo E300BT on the
Bluetooth feature of your first
device, or
• switch o the headset and switch it
on again.
» The headset is now connected to
two devices.
Pair two devices through NFC
1 Make sure you turn on the NFC function
on your phone and your phone’s screen
remains active.
2 Place your phone over the headset so
that the NFC detection area of each
device can touch each other.
3 Pair the headset with the first device.
4 Pair the headset with the second
device.
» The headset is now connected to
two devices.
Note
• When you are listening to music on the first device
and play the music on the second device, simply
pause the music on the first device. The headset
will be connected to and play music on the second
device automatically.
• When there is an incoming call from one of your
devices, the music will pause on the other device
automatically to receive the call and resume when
you finish the call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
