6 EN
4 Use your
headset
Connect the headset to a
Bluetooth device
1 Turn on your mobile phone/Bluetooth
device.
2 Press and hold the power on/o button
to turn the headset on.
» The blue LED flashes.
» The headset is reconnected to
the last connected mobile phone/
Bluetooth device automatically.
Tip
• If you turn on the mobile phone/Bluetooth device
or activate the Bluetooth feature after turning on
the headset, you have to reconnect the headset and
mobile phone/Bluetooth device manually.
• If your mobile phone/Bluetooth device cannot
reconnect automatically, try to reconnect manually
by clicking the headset's name again under the
Bluetooth setting manual on your mobile phone/
Bluetooth device.
Note
• If the headset fails to connect to any Bluetooth
device within range in 5 minutes, it will switch o
automatically to save the battery life.
Manage your calls and
music
On/o
Task Button Operation
Turn the
headset
on.
Power
on/o
Press and hold for 2
seconds.
Turn the
headset
o.
Power
on/o
Press and hold for 4
seconds.
» The white LED
is on for 1.5
seconds and
then the headset
is o.
Music control
Task Button Operation
Play or pause
music.
Music/call
control
Press
once.
Adjust
volume.
Volume/track
control
Press
once.
Skip forward/
backward.
Volume/track
control
Press and
hold.
Call control
Task Button Operation
Pick up/hang
up a call.
Music/
call
Press once.
Reject an
incoming call.
Music/
call
Press and
hold for 2
seconds.
Switch caller
during a call.
Music/
call
Press twice.
Mute/unmute
the microphone
in a call.
Volume/
track
control
Press volume
up and down
button once
at the same
time.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
