Onkyo HT-R340 User Manual

Front &Rear Panels
North American and Asian Models
8
European Models
ONKYO
"""
QOO
@,}--------i
For detailed information, see the pages in parentheses.
CD STANDBY/ON button (37)
This button is used to set the AV receiver to On or
Standby.
® STANDBY indicator (37)
This indicator lights up when the AV receiver is in
Standby mode, and it flashes while a signal is being
received from the remote controller.
@ Remote-control sensor (19)
This sensorreceives control signals from the remote
controller.
@ STEREO button (49)
This button is used to select the Stereo listening
mode.
® LISTENING MODE [~]I[~] buttons (49)
These buttons are used to select the listening modes.
a
® Display
See "Display" on page 9.
(J) DISPLAY button (40)
This button is used to display various information
about the currently selected input source.
® DIGITAL INPUT button (38, 57)
This button is used to assign the digital inputs and to
specify the format
of digital input signals.
® DIMMER or RTIPTYITP button (44,45)
This button is used to adjust the display brightness.
On the European model, this is the
RTlPTyrrp but-
ton, and it's used with RDS (Radio Data System).
See "Using RDS (European models only)" on
page 43.

Onkyo HT-R340 Specifications

General

Brand	Onkyo
Model	HT-R340
Category	Home Theater System
Language	English