Firmware Update
5 4 3
2
1
6
D
C
A
B
D
C
A
B
5 4 3
2
1
6
TX-SR393/TX-SR494
HT-R398 / TX-SR292BT
HT-R495
How to check Firmware Version & Preparation of Update
Step1 : [INFO] + [ON/STANDBY] x 2
Main Firmware Version will appear on the main unit’s display.
Step2 : [Cursor UP +1]
DSP Firmware Version will appear on the main unit’s display.
Step3 : [Cursor UP +2]
Video Firmware Version will appear on the main unit’s display.
Step4 : [Cursor UP +3 ]
OSD Firmware Version will appear on the main unit’s display.
Step7 : [TONE +3 over]
Return to Display Main Firmware Version ( Return Step1)
When It is pushed Cursor Down, It is appeared before step.
[Preparation of Update]
1. Connect the USB storage device to your PC. If there is any data in the USB storage
device, remove it.
2. Download the firmware file (package file) from the OPSIS-server.
However European service partners should download the firmware file (package file)
from the ExtraNet.
ID and Password are those we informed when changed.
Filename is as follows: ONKAVR002B_Rxxx_xxx.zip for TX-SR393, HT-R398
Filename is as follows: ONKAVR002C_Rxxx_xxx.zip for TX-SR494, HT-R495
Filename is as follows: ONKAVR002B_Rxxx.zip for TX-SR292BT
Unzip the downloaded file. A following file is created.
AVR002B**************.of1 for TX-SR393, HT-R398
AVR002C**************.of1 for TX-SR494
AVR002B**************.of1 for TX-SR292BT
There is one file for update.
3. Copy it to the USB storage device. Be careful not to copy the zip file.
4. Remove the USB storage device from your PC.
To Next Page
Loading...
Need help?
General
