SPECIFICATIONS-2
HT-R520
TX-SR502/E/8250/HT-R520
Amplifier Section
Video Section
Tuner Section
FM
AM
General
Video Inputs
Video Outputs
Audio Inputs
Audio Outputs
Specifications and features are subject to change without notice.
Power output:
All channels:
130 W(8 , 20 Hz-20 kHz, FTC)
Dynamic power:
THD (total harmonic
distortion):
0.08% (rated power)
Damping factor:
Input sensitivity and
impedance:
200 mV/47 k (LINE)
Output level and
impedance:
200 mV/470 (REC OUT)
Frequency response: 10 Hz-100 kHz/+1 dB, -3 dB (Direct mode)
Tone control: ±12 dB, 50 Hz (BASS)
±12 dB, 20,000 Hz (TREBLE)
S/N ratio (Direct mode): 100 dB (CD, IHF-A)
Speaker impedance: 6
Input sensitivity, output
level and impedance:
1.0 Vp-p/75 (component and S-VideoY)
Component video
frequency response:
5 Hz-50 MHz
87.5-108.0 MHz
Usable sensitivity: FM STEREO 17.2 dBf, 2.0 µV (75 IHF)
FM MONO 11.2 dBf, 1.0 µV (75 IHF)
S/N ratio: FM STEREO 70 dB (IHF-A)
FM MONO 76 dB (IHF-A)
THD: FM STEREO 0.3% (1 kHz)
FM MONO 0.2% (1 kHz)
FM stereo separation: 45 dB at 1 kHz
Tuning frequency range: 530-1700 kHz
Usable sensitivity: 30 µV
S/N ratio: 40 dB
THD: 0.7%
Power supply:
Power consumption: 4.6 A
Standby power
consumption:
2.5 W
Dimensions
(W x H x D):
17-1/8" x 5-7/8" x 14-13/16"
(435 x 150 x 376 mm)
Weight: 22.5 lbs. (10.2 kg)
Component video inputs:
S-Video inputs:
Video inputs:
Component video
outputs:
S-Video outputs:
Video outputs:
Digital inputs: 4 (Optical 1-3, Coaxial)
Analog inputs:
Multichannel analog
inputs:
5.1 ch (Front L/R, Center, Surround L/R, Subwoofer)
Analog outputs:
Subwoofer pre out: 1
Speaker outputs: 6+2
Phones: 1
2 x 260 W (3 , front)
2 x 200 W (4 , front)
2 x 150 W (8 , front)
60 (front, 1 kHz, 8 )
0.7 Vp-p/75 (component PB/CB, PR/CR)
0.28 Vp-p/75 (S-Video C)
1.0 Vp-p/75 (composite)
Tuning frequency range:
AC 120 V, 60 Hz
2 (DVD, Video 1/2/3)
4 (DVD, Video 1-3)
4 (DVD, Video 1-3)
1 (Component Video Out)
2 (Video 1 Out, Monitor Out)
2 (Video 1 Out, Monitor Out)
2 (Tape Out, Video 1 Out)
6 (CD, Tape, DVD, Video 1-3)