Onkyo HT-R591B User Manual

TX-SR313/ HT-R358/391/558/591/ HT-RC430
DEBUG MODE-1
AUDIO DEBUG MODE-1/5
To set in Debug mode
1. Press and hold down DISPLAY button, then press ON/STANDBY button.
2. Press + (TONE) button while the version number of microprocessor is displayed.
3. Press DISPLAY button while the version number of DSP is displayed.
11. Press DISPLAY button.
D1 . 05 / 12 3 27 A EA
M1 . 06 / 12 4 17 A E
AUDIO dubug mode
The status of DSP and DIR etc
will be displayed.
4D 4 8K 1 N 0 FF P o0
e.g.
The version number of microprocessor is displayed
only for 3 seconds.
The version number of DSP is displayed
only for 3 seconds.
The operations of DSP and DIR etc are able to checked by the information displayed on FL in this debug mode.
This information will help to analysing digital audio no sound trouble.
Exit
e.g.
e.g.
ON/STANDBY
+ (TONE)
DISPLAY
e.g.

Onkyo HT-R591B Specifications

General

Brand	Onkyo
Model	HT-R591B
Category	Receiver
Language	English