Onkyo L-DR7 User Manual

38
Making Antenna (Aerial) Connections
■ Adjusting the position of the FM indoor antenna (aerial)
While listening to an FM program, extend the antenna (aerial) and move it in various directions
until the clearest signal is received. Then secure the antenna (aerial) with push pins in the posi-
tion with the least distortion.
■ Adjusting the position of the AM indoor antenna (aerial)
While listening to an AM program, set the antenna (aerial) in the direction and position where you
receive the clearest sound.
Position it as far away as possible from the unit, TVs, speaker cables, and power cords (mains
leads).
Note
Insert one end of the AM antenna (aerial) cord into either AM antenna (aerial) connector, and the other
end into the other connector. There is no difference between one end of the AM antenna (aerial) cord
and the other end — unlike the speaker cords, which have positive and negative poles.
An outdoor antenna (aerial) will be more
effective if it is stretched horizontally above a
window or outside.
Leave the supplied AM indoor antenna
(aerial) connected.
Note
To avoid the risk of lightning and electrical
shock, grounding is necessary. Follow item 14
of the “Important Safeguards” on page 5 when
you install an outdoor antenna (aerial).
Connecting the supplied FM and AM indoor antennas (aerials)
Insert into the hole.
Push up and
hold the lever.
Insert the end
of the cord.
Release the
lever to secure
the connection.
AM indoor antenna (aerial)
FM indoor
antenna (aerial)
Connecting an AM outdoor antenna (aerial)
Outdoor antenna (aerial)
AM indoor antenna
(aerial)
insulated antenna cable
L-DR7_E.book Page 38 Tuesday, December 24, 2002 3:10 PM

Onkyo L-DR7 Specifications

General

Brand	Onkyo
Model	L-DR7
Category	Home Theater System
Language	English