Oracle X7 series User Manual

Reset Oracle ILOM Firmware to Default Settings (Oracle Hardware Management Pack)
2.
To reset the Oracle ILOM firmware to default settings in the Oracle ILOM
command-line interface (CLI):
a.
Log in to the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
Type: set /SP reset_to_defaults=factoryset
Related Information
■
Reset the Oracle ILOM Configuration to Factory Defaults, Oracle ILOM Administrator's
Guide for Configuration and Maintenance, Firmware Release 4.0.x at http://www.oracle.
com/goto/ilom/docs
Reset Oracle ILOM Firmware to Default Settings
(Oracle Hardware Management Pack)
1.
Access the operating system command-line with root privileges.
For more information, see “Accessing the Host Console” on page 38 or “Accessing Oracle
Hardware Management Pack” on page 32.
2.
Type: ilomconfig reset config
A prompt appears asking you to confirm that you want reset the Oracle ILOM configuration.
3.
Type y to confirm that you want to proceed.
Related Information
■
Configuring Oracle ILOM (ilomconfig), Oracle Hardware Management Pack Server CLI
Tools User's Guide at: http://www.oracle.com/goto/ilom/docs
Backing Up and Restoring Hardware and Firmware Configurations 103

Oracle X7 series Specifications

General

Brand	Oracle
Model	X7 series
Category	Server
Language	English