Orbit 96840 User Manual

54
INSTALL BATTERIES PROGRAMMING YOUR TIMER
Step 1
Remove cap
Step 2
Separate program pod from base
Step 3
Insert 3 AA batteries as indicated in the
battery compartment
Step 4
Return program pod to base
Note: During battery changes,
programming will be preserved
for 30 seconds.
Step 1
Press reset button.
Step 2–Set Time
Turn the dial to SET TIME.
Press
or to set the current time.
To quickly switch between
AM or PM press
.
Step 3–Set Date
Turn the dial to SET DATE.
Press
or to set the current year
then press
.
Press
or to set the current month
then press
.
Press
or to set the current day.
Step 4–Start Times
Turn the dial to START TIMES.
Press
to select the desired program.
NOTE: Use program B only if you want
to schedule watering independent of
Program A.
Press
or to set the desired start
time.
If more cycles are desired then press
and set another start time (up to 4).
To delete a start time press
.
NOTE: If start times overlap then the
second start time will water after the first
is finished.
Step 5–How Often
Turn the dial to HOW OFTEN.
Press
to select the desired program.
Step 1
Step 3
Step 2
Step 4

Orbit 96840 Specifications

General

Brand	Orbit
Model	96840
Category	Controller
Language	English