Oreck elevate control User Manual

16
Maintenance — Adjusting or Replacing Brushroll
2
Lay the unit at to access
the power head nozzle.
Remove the 7 screws to take
off the baseplate from the
power head.
1
Your Oreck
®
unit comes with
the brushroll assembled in the
“NEW” position (multiple
notches showing on top edge).
As the brushroll wears it can be
adjusted for longer life.
3
Remove the brushroll
belt and brushroll from the
holding channels inside of
the power head nozzle.
4
When worn, rotate both
plastic black endcaps at the
ends of the brushroll to show
a single notch “OLD” position.
Insert back into the holding
channels of the power head
nozzle.
WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY FROM MOVING PARTS — UNPLUG
BEFORE CLEANING OR SERVICING. DO NOT USE VACUUM WITHOUT THE FILTRATION BAG IN PLACE.
NEW
OLD

Oreck elevate control Specifications

General

Brand	Oreck
Model	elevate control
Category	Vacuum Cleaner
Language	English