11
Accessories
Call your authorized ORECK Home Care Center,
your authorized ORECK dealer, or call the Home
Care Hotline toll free at
1-888-742-6769.
To Replace Belt
WARNING: To reduce the risk of
electric shock or injury from moving
parts, unplug before servicing.
1. Replacement belts (Part No. OR114) for ORECK
STEEMERS are available from ORECK.
Call Toll-Free 1-888-742-6769.
2. Be sure that your cleaner is unplugged from the
electrical outlet!
3. Unplug the power cord leading from the power
head to the rear of the main cleaner (Figure 4).
4. Remove the power nozzle from the main
cleaner (Figure 15).
8. To install a new belt, remove brush roll and
insert the new belt into the rectangular cavity.
Using a long screwdriver, loop belt around
motor shaft. Pull and stretch belt over crowned
end of the brush roll.
9. Replace brush roll into the power nozzle and
rotate brush to properly align belt.
10. Replace belt cover, brush roll clamp and screws.
11. Reconnect power cords and test.
25
C: Belt
5. Remove screw from
belt cover
(Figure 25-A).
6. Remove two (2)
screws holding the
brush roll clamp in
place and remove
clamp (Figure 25-B).
7. Remove and replace
the old belt if broken
or if excessive wear is
noted (Figure 25-C).
STEEMER Full Release™
Professional Spot & Stain
PreCleaner (Item
FRSS131)
STEEMER Full Release™
Professional Carpet Cleaner
(Twin Pack) (Item FRC124)
STEEMER Full Release™
Professional Upholstery
Cleaner (Twin Pack)
(Item FRU125)
STEEMER Valu-6-Pack
(Item FRC132)
5 Carpet Cleaners and
1 Spot & Stain PreCleaner
ORECK STEEMER Belts
(Item OR114)
2 Pack
A: Belt
Cover
B: Brush Roll Clamp
To Previous Page
Loading...
Need help?
General
