Oricom Secure 720 User Manual

6 GETTING STArTED
Desk stand
To install and remove desk stand, insert left tab into slot on
rear side of parent unit and then squeeze together to lock
in place.
In-use time and battery charging
Depending on the usage, the parent unit will work for up
to 8 hours on a fully charged battery with the VOX feature
turned ON.
When the battery charge becomes low on the parent unit,
the amber power LED will flash slowly. At this point, you
need to return the parent unit to its charging cradle.
When charging, the battery status indicator on the parent
unit screen will change to the charging icon <
>.
To speed up the charging process, turn the parent unit off
when charging if it is not being used.
Youcancontinuetouseyourparentunittomonitoryour
baby even when the battery is low, provided it remains in
the charging cradle to recharge the battery.
NOTE:
• Theparentunitcanbekeptonthechargerevenifitis
fully charged.
• Theparentunitcanbeusedonoroffthecharging
cradle.
• Whentheparentunitisbeingusedonthecharging
cradle,chargingtimewillbeextended.
• WerecommendthatyouTURNOFFtheparentunit
when it is not in-use, to conserve battery power.
Battery Life
The rechargeable battery pack (supplied) can be charged
and discharged hundreds of times, however it will
eventually wear out and lose its ability to hold a full charge.
When the in-use time becomes noticeably shorter than
normal, it is time to purchase a new battery pack.
How to purchase spare parts
YoucanpurchaseBatterypacks(Partnumber:2B0077),
chargingcradlesandextracameraunitsfromOricom
www.oricom.com.au

Oricom Secure 720 Specifications

General

Brand	Oricom
Model	Secure 720
Category	Baby Monitor
Language	English