Oricom Secure 720 User Manual

12 TrOuBLEShOOTING
5 Customer Support
ShouldyouexperiencedifficultiesoperatingtheSC720,pleaserefertothetroubleshootingguidebelow.Ifyoustill
experiencedifculties,pleasecontactOricomCustomerSupporton1300889785forassistance.
Troubleshooting
Problems Solutions
Equipment does not function −Checkbothparentunitandbabyunitareturnedon
Check parent unit is charged or placed in charger
Check baby unit is connected to power.
Lost link [
] displaying on
parent unit
−Movetheparentunitclosertothebabyunit.
Try resetting your monitor to avoid busy channels:
1. Turn both camera and parent units off and remove the battery in the parent
unit. Leave unplugged for 1 minute.
2.IfyouhaveWi-Fiinthehome,makeitbusybystreamingavideoonYouTube
or similar.
3. Turn the camera back on wait for 30 seconds.
4. Plug the battery into the parent unit and turn on.
If the display is still showing [ ], please re-register the units as instructed
on page 7. When re-registering it is best to keep the camera and parent
units close together (within 1m) and keep clear of all other electronic devices
including mobile phones, tablets or computers.
Reception interference −Movetheparentunitclosertothebabyunit.
Reposition the baby unit slightly.
Check for interference from other electronic devices such as Wi-Fi.
High pitched noise from parent unit -
Feedback
−Increasethedistancebetweentheparentunitandbabyunit.
Reduce the volume on the parent unit.
AmberpowerLEDashing −Thebatterylevelislow.Returntheparentunittothecharger.

Oricom Secure 720 Specifications

General

Brand	Oricom
Model	Secure 720
Category	Baby Monitor
Language	English