Brushless Motor
30 W
/
60 W
/
120 W
QUICK START GUIDE
BMU
Series
Connector type
HM-5191
And others.....
Remove
the panel.
Refer to "8 Convenient functions."
Many other useful features are also available
CN1 : 3 pin
CN4 : 9 pin
To display the rotation speed of the
gearhead output shaft
To display the size of a load
To hold a load by the slight
position-keeping function
To increase the rotation speed slowly
AC power supply
The rotation speed will not change even if the setting dial is turned.
The motor can be operated using a programmable controller.
For example.....
1
Press the MODE key
2
1
Press and hold the MODE key for 5 seconds
Press the MODE key
Press and hold the MODE key for 5 seconds
2
When the
FUNCTION key is
pressed, the rotation
speed is displayed.
□
Connector
□
Driver
□
QUICK START GUIDE (this document)
Package contents
Motor (sold separately)
□
OPERATING MANUAL
This document describes for when the
motor is of the connector type.
The descriptions other than "connection
for motor and cable" are common to the
BMU
Series.
Refer to "7 Operating by programmable controller."
© Copyright ORIENTAL MOTOR CO., LTD. 2016
ORIENTALMOTOR CO.,LTD.
OPERATING MANUAL
OPERATING MANUAL
There are two types of connection cables
which cable leading directions are dierent.
(
→
Refer to the right gure)
To connect the motor and driver, the dedicated
connection cable is always needed.
For the round shaft type, only the cable for leading in
opposite direction of output shaft can be used.
Connection cable (sold separately)
Leading in opposite direction
of output shaft
Leading in direction of
output shaft
Model:
CC__HBLF
Model:
CC__HBLB
□
Motor
□
Mounting screw set
The gure shows an
example of the
combination type.
∗
Be sure to match the motor output power with the
driver output power.
Supplied with the
combination type.
□
OPERATING MANUAL
Thank you for purchasing an Oriental Motor product.
Use the product correctly after thoroughly reading the section "Safety precautions" of the operating
manual.
This document describes methods till rotating the motor after connecting it to the driver.
For details about how to use the product, refer to the supplied with the driver.
OPERATING MANUAL
The package includes the items shown below.
Be sure to ground the Protective Earth Terminal
(ground terminal) to ensure the safe use of the product.
Refer to "1 Connecting" for details, and ground securely.
To lock the
setting data
To release
the lock
As mentioned in the right,
various operating functions
are available.
The display blinks
several times
The display blinks
several times
MODE key
Top screen of
monitor mode
FUNCTION key
Display: Rotation speed
To Next Page
Need help?
General
