OWC MERCURY ELITE PRO MINI User Manual

Chapter 2 - Assembly & Installation Instructions
➂
From the rear of the enclo-
sure, press inwards on the
rear ports to slide the inner
chassis out towards the
front of the enclosure.
Once you have opened
the enclosure. remove the
bag of screws you will nd
inside it to use in a future
step.
Once the inner chassis is removed from the outer enclosure, you will see the
SATA data & power combo connector where your 2.5” SATA drive will attach
to the bridge card.
➙
➃
➙
OWC Mercury Elite Pro mini

OWC MERCURY ELITE PRO MINI Specifications

General

Compatible operating systems	Windows MacOS Linux
Supported storage drive interfaces	Serial ATA
FireWire 400	Yes
USB 2.0 ports quantity	1
Cables included	eSATA, FireWire, USB
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	0 - 70 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Material	Aluminum
Product color	Silver
Data transfer rate	3 Gbit/s

Weight and Dimensions

Depth	139.7 mm
Width	96.52 mm
Height	27.94 mm
Weight	330 g